Difference: CSNELAB7-2015 (1 vs. 2)

Revision 22015-10-26 - JimSkon

Line: 1 to 1
 
META TOPICPARENT name="CSC4093ComputerNetworking2015"

Lab 7 for CSNE Majors

Overview

Line: 10 to 10
 
  1. Launch the Learning lab
  2. Log in again for the lab
  3. For each lab, if you don't have significant experience setting up Cisco egquipment, it is imporant that you watch he video's for each lab. These are about 14-15 minutes each.
Changed:
<
<
  1. Enabling Dynamic Routing to the Main Office
  2. Implementing Access Lists
  3. Implementing Basic NTP
>
>
  1. Using Cisco Discovery Protocol
  2. Managing Cisco Devices
  3. Confirming the Reconfiguration of the Branch Network
 
  1. Answer the questions below, and turn in
References
Changed:
<
<

1. "Enabling Dynamic Routing to the Main Office"

Reading
>
>

1. "Using Cisco Discovery Protocol"

Reading

 
Overview:
Changed:
<
<

Questions:

>
>
In this activity, you will use Cisco Discovery Protocol to obtain information about directly attached Cisco devices, also you will disable Cisco Discovery Protocol from running on selected interfaces. After completing this activity, you will be able to meet these objectives:
 
Changed:
<
<
Answer the following questions, and turn in on Moodle:
Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
>
>
  • Verify that Cisco Discovery Protocol is running on your workgroup router and switch.
  • Display information about neighboring Cisco devices.
  • Limit which interfaces run Cisco Discovery Protocol as a security measure.
  • Verify your changes.
Screen_Shot_2015-10-26_at_3.13.50_PM.png
 
Changed:
<
<

2. "Implementing Access Lists"

>
>
Questions:

Answer the following questions, and turn in on Moodle:

  1. What is the purpose ofthe CDP? Why might this be useful?
  2. List all the types of information that CDP will give you
  3. Why should you only use CDP in certain cases? Which cases are these?
  4. What is the CDP show CDP traffic command for?
  5. Fill out the Implementation Plan below showing all steps:
  6. Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

Screen_Shot_2015-10-26_at_3.41.55_PM.png

2. "Managing Cisco Devices"

Reading:

Overview:

In this activity, you will use the Cisco IOS copy and debug commands. After completing this activity, you will be able to meet these objectives:

  • Upload and download configuration files.
  • Copy and delete files to local NVRAM memory.
  • Ensure that the router is lightly loaded before using debugging commands.
  • Turn debugging on and off.
Screen_Shot_2015-10-26_at_3.41.55_PM.png
 
Deleted:
<
<
Reading:
 Questions
Changed:
<
<
>
>
  1. What is tghe purpose of the NVRAM?
  2. What does the descript-config give yout back? Include what you see when it works correctly.
  3. What is the purpose of saving and restoring a configuration?
  4. What are ICMP packets? What are they used for here?
  5. How can show debugging help a network engineer?
 
  1. Fill out the Implementation Plan below showing all steps:
Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

Line: 70 to 98
 
         
         
Changed:
<
<

3. "Implementing Basic NTP"

>
>

3. "Confirming the Reconfiguration of the Branch Network"

Activity Objective

 
Changed:
<
<
Reading:
  • ment/configuration/guide/sm_nx_os_cg/sm_3ntp.html][Configuring NTP]]
Activity Objective
>
>
In this activity, you will assume that you are taking over the reconfiguration of a branch network from an administrator who has not completed the configuration. In fact, some of the settings may be misconfigured. You will use the knowledge and experience that you have gained in the earlier labs to complete the reconfiguration, correction, and testing. After completing this activity, you will be able to meet these objectives:
  • Complete the configuration of your assigned workgroup switch using information that is provided in the checklist in the JobAids link.
  • Complete the configuration of your workgroup router using information that is provided in the checklists in the JobAids link.
  • See the routes that are indicated in the visual objective after enabling dynamic routing on your workgroup router.
  • Perform tests to validate that your final configuration meets the new topology information.
Screen_Shot_2015-10-26_at_4.13.59_PM.png
 
Changed:
<
<

Questions

  1. Fill out the Implementation Plan below showing all steps:
Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

         
         
         
         
         
         
         
         
         
         
         
         
         
         
         

Turn in

>
>
Questions
  1. What is the current state of the router and switch at the start of this lab?
  2. What are the commands you use to text the configuration, and what are the ouputs?
  3. What are the errors you found in the configuration (if any)?
Turn in
 
  1. Answer the questions aboue in a word document.
  2. Do the Task Plans
  3. Turn it all in on moodle
\ No newline at end of file
Added:
>
>
META FILEATTACHMENT attachment="Screen_Shot_2015-10-26_at_3.13.50_PM.png" attr="" comment="" date="1445887029" name="Screen_Shot_2015-10-26_at_3.13.50_PM.png" path="Screen_Shot_2015-10-26_at_3.13.50_PM.png" size="76981" user="JimSkon" version="1"
META FILEATTACHMENT attachment="Screen_Shot_2015-10-26_at_3.41.55_PM.png" attr="" comment="" date="1445888717" name="Screen_Shot_2015-10-26_at_3.41.55_PM.png" path="Screen_Shot_2015-10-26_at_3.41.55_PM.png" size="98497" user="JimSkon" version="1"
META FILEATTACHMENT attachment="Screen_Shot_2015-10-26_at_4.13.59_PM.png" attr="" comment="" date="1445890624" name="Screen_Shot_2015-10-26_at_4.13.59_PM.png" path="Screen_Shot_2015-10-26_at_4.13.59_PM.png" size="130878" user="JimSkon" version="1"

Revision 12015-10-21 - JimSkon

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="CSC4093ComputerNetworking2015"

Lab 7 for CSNE Majors

Overview

We will be continuing with the next 3 learning labs from CISCO. These are more involved labs, and will require some reading and research to understand. A great resource is CCENT/CCNA ICND1 Official Exam Certification Guide, Second Edition .

Steps

  1. Log in at: CISCO Lab Login
  2. Launch the Learning lab
  3. Log in again for the lab
  4. For each lab, if you don't have significant experience setting up Cisco egquipment, it is imporant that you watch he video's for each lab. These are about 14-15 minutes each.
  5. Enabling Dynamic Routing to the Main Office
  6. Implementing Access Lists
  7. Implementing Basic NTP
  8. Answer the questions below, and turn in
References

1. "Enabling Dynamic Routing to the Main Office"

Reading
Overview:

Questions:

Answer the following questions, and turn in on Moodle:

Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

         
         
         
         
         
         
         
         
         
         
         
         
         
         
         

2. "Implementing Access Lists"

Reading:

Questions
  1. Fill out the Implementation Plan below showing all steps:
Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

         
         
         
         
         
         
         
         
         
         
         
         
         
         
         

3. "Implementing Basic NTP"

Reading:

  • ment/configuration/guide/sm_nx_os_cg/sm_3ntp.html][Configuring NTP]]
Activity Objective

Questions

  1. Fill out the Implementation Plan below showing all steps:
Implementation Task List

Task No.

Task

Implementation Command(s)

Verification Command(s)

Notes

         
         
         
         
         
         
         
         
         
         
         
         
         
         
         

Turn in

  1. Answer the questions aboue in a word document.
  2. Do the Task Plans
  3. Turn it all in on moodle
 
This site is powered by the TWiki collaboration platformCopyright &© by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback